Operating guidance of membrane switch

Source: FLEXKYS Editorial Office Release time：2022-08-22 17:16 Click：

Working Environmental Requirements

1-1.Operating temperature:

Metal dome ：-20℃-60℃

Poly dome:-20-40℃

1-2.Operating Humidity:

Ordinary membrane switch:40℃，RH <90%

Water proof membrane switch: IPX5

Mount Requirements

The membrane switch is suitable for clean and smooth surface, such as ABS,PC and stainless surface. It don’t fit for silicon surface (adhesion promoter needed).

Operating temperature: 15-30℃

Operating Humidity: RH45~80%

The bond process is one time operation. The switch can not be repeat bonded, or it will affect the stickiness of adhesive and the lifespan of buttons.

Gently assemble the switch and do not pull the tail hard. The minimum bending radian of the lead wire is R=2mm.

Click here for correct mount way

Operating on keypad

1.The membrane switch should be used on flat and hard surface to press keypad. Do not press it on soft or curving surface or pinch it on hand. Wrong operation will short the lifespan of switch and also will cause damage.

2.Please press button by finger or soft silicon. Do not use hard objects like screwdriver, metal stick in case of any malfunction.Don’t knock button by heavy objects.

3. Do not use sharp objects to poke any areas on the panel or knife to scratch it.

4. Use the product under required environment.

5. Do not use the normal panel membrane switch (without water proof and ultraviolet proof) outdoor for long time.